guitars made vintage style
USA made-- all in house productions
Gibson or Fender scale
maple neck, rosewood finger board, abalone inlay, mahogany, walnut, or maple top, poplar back,
chambered body, set neck.
-- other styles available, or built to your specs.
Starting under $1000.00 !
------------------------------------------------------------
VIC GUITARS ON TWITTER
---------------------------------------------------------------------------------------------
No trades or reductions.
---------------------------------------------------------------------------------------------
VIC NRG
This VIC guitar was built in September 2008. The body is a chambered 3 piece mahogany top with a poplar back painted black with an all lacquer finish. The neck is maple with a soft "V" shape, sculpted headstock and a rosewood fingerboard with abalone inlays. All gold hardware and Seymour Duncan '59 pickups.
VIC THRASHER SUNBURST
2003 VIC Thrasher guitar. This guitar was built with a poplar
body, the neck is maple with a maple fingerboard and has a soft "V"
shape. Built in July 2003, this is the first guitar in the Thrasher series.
there is quite a bit of wear on the fingerboard but the frets are in good
shape. Also has ghost truss rod cover. Everything is hand made here in SC.
------------------------------------------------------------------------------------------------------------------
VIC BLUE THRASHER
Vic BlueThrasher Guitar. Built in July 2004. Handcrafted in SC.
This guitar has a poplar body with a "V" shaped large neck made of
maple with a sculpted headstock. The fingerboard is rosewood with mother of
pearl inlays, ghost trussrod cover, and nice tuners. also has an old Gibson
whammy that works well. This guitar has been used in the studio on many
recordings and just as much on stage.
------------------------------------------------------------------------------
VIC WREN
2007 VIC Wren Guitar made here in South Carolina. This is the 2nd guitar of that series. The body is a 3 piece mahogany top with a poplar back for thickness. This guitar has Gibson brand humbucker pickups, The sustain is incredible! The neck is maple with a rosewood fingerboard (Gibson Scale). The headstock is sculpted. Abalone inlays and a good size fret put in.The tuners have been changed out. The old ones were Gibson Kluson tuners. The newer ones are actually better. Amber tinted lacquer finish. There is a little bit of wear on the neck and the back of the body. It is still in new condition. The weight is about 9 lbs. The neck has a soft V shape. The width at nut is 43mm, 12th fret is 52mm and the 22nd fret is 56mm wide. The body width is about 1 3/4 inches.
 |
| ---------------------------------------------------------------------- |
 |
| ------------------------------------------------- |
Custom made truss rod cover
This guitar built for Carl Sperry (Cortez & The Killers)
